GEX Exo Terra Timer Thermostat RTT-1 Reptile Thermostat

Thank you for viewing.
This item was only used for about two weeks and shows no noticeable scratches, but please understand that it is not a new product.

Maintain natural biological rhythms with proper temperature and lighting control!
Target: Reptiles
Country of Origin: Japan

Features:
● A thermostat for reptiles that controls heating and lighting equipment with this single unit.
● Control temperature can be set for when the lighting is ON/OFF.
● Features an easy-to-set LCD panel.
● Control temperature can be set from 15 to 40℃.
● Equipped with a warning lamp to indicate when an abnormality occurs.
● Includes a backup function for peace of mind during power outages.
● Excellent noise resistance to prevent malfunction.

Rated Voltage/Frequency: AC 100V 50/60Hz
Rated Power Consumption: 600W

Specifications:
● Control Temperature Range: 15-40℃
● Usable Heating Equipment Capacity: Up to 300W
● Usable Lighting Equipment Capacity: Up to 300W
● Temperature Display: Integer display
● Warning Display (Lamp): Overheating alarm (settable within the range of High Temp Setting +2℃ to 45℃)
● Overcooling alarm (settable within the range of 5℃ to Low Temp Setting -2℃)
● Sensor abnormality alarm, unit abnormality alarm
● Time Display: 4 digits, 24-hour display (Time accuracy ±5 minutes/month)
● Backup Function: Maintains for approximately 1 hour (clock, setting timer, set temperature, alarm temperature)
● Usable Temperature Range (Unit): 0-40℃
● Usable Ambient Humidity (Unit): 10-85%

Size (approx.):
Unit Size: Approx. 7.8 x Depth 3 x Height 15.3 cm
Power Cord: Approx. 1.3 cm
Sensor Cord: Approx. 1.5 m
Thermostat Function Outlet Cord: Approx. 0.2 m
Timer Function Outlet Cord: Approx. 0.2 m

How to Use:
● Select a location for the unit that is not exposed to water or direct sunlight, and has good ventilation. Hang it using commercially available hooks (sold separately).
● Install the heating equipment in the cage and connect it to the thermostat function outlet.
● Install the lighting equipment in the cage and connect it to the timer function outlet.
● Fix the sensor in the cage at the desired temperature monitoring location (a position not directly exposed to heat from the heating equipment and where the animal cannot easily tamper with it) using the included suction cup.
● Set the current time, control temperature, and timer to operate. Refer to the instruction manual for detailed setting instructions.
*Separate heating and lighting equipment for reptile and amphibian keeping is required for use with this product.